Roland VersaCamm VS-640 Service Notes page 277

CODE EXPLANATION
Wiper unit does not work
0109
correctly.
Input value from Linear Encoder
is not changed by the Linear
Encoder origin setup.
0110
When Motor stops during
printing, expected movement is
not completed on some head.
This error occurs when the
0111
machine performs the Auto Crop
Mark Detection
Communication error with
0112
Cartridge IC driver
There is a problem with
0130
Thermistor for Print Heater
Print Heater temperature has
0135
reached 60°C and above.
There is a problem with
0140
Thermistor for dryer.
Dryer temperature has reached
0145
80°C and above.
CAUSE
Wiper Unit hits the Tool Carriage
Wiper Motor error
Defect of Wiper Unit
Defect of Wiper Sensor
Cut-line or short-circuit of cable and Flexible
cable
Read error of Linear Encoder.
Read error of Encoder on Scan Motor side.
Belt is not fixed to Head Carriage firmly.
Crop-Cut Adjustment in the Service menu has
not been performed.
Cartridge IC driver is broken.
Cartridge IC driver cable has short circuited or
cut-line.
Thermistor cable has short circuited or cutline.
Thermistor has a problem.
Print Heater Cable connection has a problem.
Thermostat has a problem.
Thermistor has a problem.
Thermistor cable has short circuited or cutline.
Thermistor has a problem.
Dryer cable connection has a problem.
Thermostat has a problem.
Thermistor has a problem.
6-13
ACTION
Move the Carriages on the bed not to hit the Wiper Unit.
Wiper Motor Replacement
Wiper Unit Replacement
Wiper Sensor Replacement
Cable and Flexible Cable Replacement
Confirm whether Encoder Scale is between the slit of
Encoder Module in a whole width of the machine.
Check cable connection between Linear Encoder Board and
Main Board.
Confirm connection between Belt and Carriage.
Linear Encoder replacement
Scan Motor replacement
Servo Board replacement
Main Board replacement
Carry out Crop-Cut Adjustment in service menu.
Ink cartridge IC sensor replacement
Check cable connection around Thermistor.
Thermistor replacement
Check Print Heater
Check Thermostat
Check Thermistor
Check Cable connection around Thermistor
Thermistor replacement
Check Dryer
Check Thermostat
Check Thermistor