Roland VersaCamm VS-640 Service Notes page 100

Bundle the tubes of the Cap Top with the Wire Saddles.
12
Bundle the tubes as shown in the fi gure. If you do
not bundle the tubes, the ink is not drained correctly.
Move the Head Carriage by hand to the lock position.
13
Turn on the Main Power SW, and then turn on the Sub Power
14
SW while pressing the left, right and down keys to enter the
Service Mode.
Perform [FUNCTION]>[CLEANING]>[POWERFUL CL.] once.
15
ON
3-27
Wire Saddle
+
FUNCTION
CLEANING
[ ]
CLEANING
POWERFUL CL.
ENTER