Table of Contents
Advertisement
7. Configuration Overview
CC1000
can be configured to achieve the
best
performance
applications. Through the programmable
configuration registers the following key
parameters can be programmed:
• Receive / transmit mode
• RF output power
• Frequency
synthesiser
parameters: RF output frequency, FSK
8. Configuration Software
Chipcon provides users of
software
program,
(Windows interface) that generates all
CC1000
necessary
based on the user's selections of various
parameters. These hexadecimal numbers
will then be the necessary input to the
microcontroller for the configuration of
for
different
key
CC1000
with a
SmartRF®
Studio
configuration
data
Figure 3. SmartRF® Studio user interface
SWRS048A
frequency
separation
crystal oscillator reference frequency
• Power-down / power-up mode
• Crystal oscillator power-up / power
down
• Data rate and data format (NRZ,
Manchester coded or UART interface)
• Synthesiser lock indicator mode
• Optional RSSI or external IF
CC1000
. In addition the program will
provide the user with the component
values
needed
for
matching circuit and the VCO inductor.
Figure 3 shows the user interface of the
CC1000
configuration software.
CC1000
(deviation),
the
input/output
Page 12 of 55
Advertisement
Table of Contents
