Table of Contents
Advertisement
8.
Configuration Overview
CC1020
can be configured to achieve
optimum
performance
applications. Through the programmable
configuration registers the following key
parameters can be programmed:
• Receive / transmit mode
• RF output power
• Frequency synthesizer key parameters:
RF output frequency, FSK frequency
8.1.
Configuration Software
TI provides users of
software
program,
(Windows interface) that generates all
CC1020
necessary
based on the user's selections of various
parameters. These hexadecimal numbers
will then be the necessary input to the
microcontroller for the configuration of
for
different
CC1020
with a
®
SmartRF
Studio
configuration
data
®
Figure 5. SmartRF
SWRS046B
separation, crystal oscillator reference
frequency
• Power-down / power-up mode
• Crystal oscillator power-up / power-
down
• Data rate and data format (NRZ,
Manchester coded or UART interface)
• Synthesizer lock indicator mode
• Digital RSSI and carrier sense
• FSK / GFSK / OOK modulation
CC1020
. In addition, the program will
provide the user with the component
values
needed
matching circuit, the PLL loop filter and the
LC filter.
Figure 5 shows the user interface of the
CC1020
configuration software.
Studio user interface
CC1020
for
the
input/output
Page 21 of 91
Advertisement
Table of Contents
