Table of Contents
Advertisement
Available languages
Available languages
10
LINKING
3.4
Several units may be interconnected in order to control all further slave units to the same effect of the
master unit.
1. Connect the DMX OUT of the master unit via 3/5-pole XLR cable to the DMX IN of the first slave unit.
2. Connect the DMX OUT of the first slave unit to the DMX IN of the second slave unit, etc. until all units
are connected in a chain.
DMX MODE
To enter the DMX mode, follow these steps:
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Connect icon, then press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select the DMX Address and press the ENTER key.
• Press the arrow keys to select the desired value (001-512).
• Press the ENTER key to confirm the setting.
• Press the LEFT button repeatedly to exit the menu and save changes.
DMX CONFIGURATION
The SUNBLAST3500MAX has 5 DMX channel configurations which can be accessed from the control panel.
• Press the ENTER button to access the main menu.
• Press the UP/DOWN button to scroll the menu, select the Set icon, then press the ENTER button to enter
the next menu.
• Press the UP/DOWN button to scroll through the menu, select Users and press the ENTER button to
enter the next menu.
• Press the UP/DOWN button to scroll through the menu, select User Mode and press ENTER to confirm
your choice.
• Use the UP/DOWN button to select the desired DMX channel configuration (Basic, Pixels,Advanced), then
press the ENTER button to confirm your choice.
• Press the LEFT button repeatedly to exit the menu and save changes.
The tables on page 18 show the mode of operation and their values DMX.
The unit is equipped with 3/5-pole XLR connections.
DMX ADDRESSING
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to SUN-
BLAST3500MAX. To able to operate the SUNBLAST3500MAX with a light controller, adjust the DMX start
address for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the func-
tion of the first DMX channel, adjust the start address 33 on the SUNBLAST3500MAX. The other functions
of the light effect panel are then automatically assigned to the following addresses.
An example with the start address 33 is shown below:
Number of
Start address
DMX channels
(example)
19
33
21
33
28
33
29
33
SUNBLAST3500MAX
DMX Address
Next possible start
occupied
address for unit No. 1
33-52
33-54
33-61
33-62
Next possible start
address for unit No. 2
53
55
62
63
Next possible start
address for unit No. 3
72
76
90
92
91
97
118
121
Advertisement
Chapters
Table of Contents
