Page 1
SUNBAR2500MAX STROBE LED BAR USER MANUAL MANUALE UTENTE EN - IT...
Page 2
All rights reserved by Music & Lights S.r.l. No part of this instruction manual may be reproduced in any form or by any means for any commercial use. In order to improve the quality of products, Music&Lights S.r.l. reserves the right to modify the characteristics stated in this instruction manual at any time and without prior notice.
3. 18 Construction of the DMX termination 3. 19 DMX control 3. 20 Pixel layouts 4 Maintenance 4. 1 Maintenance and cleaning the unit 4. 2 Fuse replacement 4. 3 Trouble shooting Packing content • SUNBAR2500MAX • Mount bracket • User manual...
SUNBAR2500MAX WARNING! Before carrying out any operations with the unit, carefully read this instruction manual and keep it with cure for future reference. It contains important information about the installation, usage and maintenance of the unit. SAFETY General instruction • The products referred to in this manual conform to the European Community Directives and are there- fore marked with .
SUNBAR2500MAX is an exceptionally powerful LED graphic strobe batten, featuring also as static blinder and flood. SUNBAR2500MAX offers a flexible control of beam coverage through an inter- changeable lens system, passing from 100° wide to 30° beam increasing the light intensity up to 4 time. ...
Page 6
SUNBAR2500MAX • Dimmer Curves:4 Different dimming curves available • Strobe/Shutter:1 - 30 Hz, electronic • Operating Temperature: -10° ~ +45° • Selectable PWM: 400~16K Hz ELECTRICAL • Power Supply: 100-240V – 50/60Hz • Power Consumption (at 230V):Full Static: 596 W Strobing 1060 W •...
SUNBAR2500MAX 1.3 OPERATING ELEMENTS AND CONNECTIONS 1. LED BAR 2. LOCKING KNOB for the mounting bracket. 3. MOUNTING BRACKET 4. CONTROL PANEL with TFT display and 4 button used to access the control panel functions and manage them. 5. AIR OPENING 6.
2.1 MOUNTING The SUNBAR2500MAX may be set up on a solid and even surface. By means of the fixing facilities of the baseplate, the unit can also be mounted upside down to a cross arm. The base plate is shown in fig.3. For fixing, stable mounting clips are required.
Connect the supplied main cable to a socket (100-240V~/50-60Hz). The unit will run built-in program to reset all motors to their home position. Shortly after that the SUNBAR2500MAX is ready for operation. To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom- mended to connect the unit to a socket which can be switched on and off via light switch.
Page 11
SUNBAR2500MAX MENU ð Fixture ð iMMer iMMer iMMer iMMer ð An Mode 3 ADVANCED ð LED Frequency ð 400Hz 600Hz 800Hz 1200Hz 2000Hz 4000Hz 8000Hz 16KHZ ð Actory eloAd ð Apping otAtion 4 INFORMATION ð ð 0-9999 ixture ð 58 °c eMperAture ð...
For operation via light control unit with DMX512 protocol, is sufficient connect the controller to SUNBAR- 2500MAX. To able to operate the SUNBAR2500MAX with a light controller, adjust the DMX start address for the first a DMX channel. If e. g. address 33 on the controller is provided for controlling the function of the...
• Press the MENU button repeatedly to exit the menu and save changes. 3.12 FIXTURE For the SUNBAR2500MAX you can access the following special functions: • Press the ENTER button to access the main menu. • Press the UP/DOWN button to scroll the menu, select the icon Set Up, then press the ENTER button to enter the next menu.
SUNBAR2500MAX Dimmer 3 - Light intensity control is finer at low and high levels, and coarse to medium levels. - Fans Mode - Select this function to set the fans operation mode. Use the arrow buttons to select Auto Speed /High Speed. Press the ENTER button to confirm your choice.
SUNBAR2500MAX • Press the UP/DOWN button to scroll through the menu, select Sequence and press ENTER to confirm your choice. • Press the UP/DOWN button to select the mode of operation: Show 1, Show 2, .., Show 18. • Press the ENTER button to confirm your choice.
SUNBAR2500MAX 3.17 CONNECTION OF THE DMX LINE DMX connection employs standard XLR connectors. Use shielded pair-twisted cables with 120Ω imped- ance and low capacity. The following diagram shows the connection mode: DMX - INPUT DMX - OUTPUT XLR plug XLR socket...
SUNBAR2500MAX 3.19 DMX CONTROL BASIC STATIC BASIC PIXEL FUNCTION FUNCTION CHANNEL CHANNEL Value Value DIMMER PIXEL 1 WHITE White 000 - 255 0~100% 000 - 255 PIXEL 2 WHITE 0~100% 000 - 255 PIXEL 3 WHITE 0~100% 000 - 255...
Page 19
SUNBAR2500MAX PIXELS - PIXELS PIXEL (ART-NET+DMX) FUNCTION MODE Value ART-NET ART-NET DIMMER Blackout 000 - 005 Min to Max 006 - 255 FLASH DURATION 15-990ms 000 - 255 FLASH RATE No Flash 000 - 010 Strobe slow to fast 011 - 255...
Page 20
SUNBAR2500MAX PIXELS - PIXELS PIXEL (ART-NET+DMX) FUNCTION MODE Value ART-NET ART-NET PIXEL 17 WHITE 0~100% 000 - 255 PIXEL 18 WHITE 0~100% 000 - 255 PIXEL 64 WHITE 0~100% 000 - 255 ADVANCED ADVANCED 1 ADVANCED ADVANCED 1 FUNCTION FUNCTION...
Page 21
SUNBAR2500MAX ADVANCED ADVANCED 2 ADVANCED ADVANCED 2 ART-NET+DMX FUNCTION ART-NET+DMX FUNCTION Value Value ART-NET ART-NET DMX ART-NET ART-NET DMX FLASH DIMMER DIMMER MODE 000 - 255 0~100% From MENU 000 - 051 Mode OFF 052 - 101 FLASH STROBE Mode 1...
Page 22
SUNBAR2500MAX ADVANCED ADVANCED 3 ADVANCED ADVANCED 3 CHANNEL CHANNEL FUNCTION BAS FUNCTION FUNCTION Value Value LAYER1 FX FLASH DIMMER LAYER2 DIMMER No Function 000 - 010 0~100% Strobe dimmer 000 - 255 FX 1 011 - 015 FLASH STROBE FX 2...
Page 23
SUNBAR2500MAX ADVANCED ADVANCED 3 CHANNEL FUNCTION Value LAYER2 FX No Function 000 - 010 FX 1 011 - 015 FX 2 016 - 020 FX 3 021 - 025 FX 4 026 - 030 FX 5 031 - 035 FX 6...
Page 24
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART-NET ART-NET DMX FLASH DIMMER LAYER2 DIMMER 0~100% Layer 2 dimmer 000 - 255 FLASH STROBE LAYER2 STROBE No flash/Closed No flash/Closed 000 - 030 Strobe slow to fast...
Page 25
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/ NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART- ART- LAYER1 STROBE No flash/Closed 000 - 030 Strobe slow to fast 031 - 100 Open 101 - 130 Random strobe slow to fast 131 - 200...
Page 26
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART-NET ART-NET DMX LAYER2 FX No function 000 - 010 FX 1 011-015 FX 2 016-020 FX 3 021-025 FX 4 026-030 FX 5 031-035 FX 6 036-040...
SUNBAR2500MAX - 4 - MAINTENANCE 4.1 MAINTENANCE AND CLEANING THE UNIT • Make sure the area below the installation place is free from unwanted persons during setup. • Switch off the unit, unplug the main cable and wait until the unit has cooled down.
SUNBAR2500MAX 4.3 TROUBLESHOOTING Problems Possible causes Checks and remedies No mains supply Check the power supply voltage • • Dimmer fader set to 0 Increase the value of the dimmer channels • • All color faders set to 0 Increase the value of the color channels •...
Page 30
Music & Lights S.r.l. si riserva ogni diritto di elaborazione in qualsiasi forma delle presenti istruzioni per l’uso. La riproduzione - anche parziale - per propri scopi commerciali è vietata. Al fine di migliorare la qualità dei prodotti, la Music&Lights S.r.l. si riserva la facoltà di modificare, in qualunque momento e senza preavviso, le specifiche menzionate nel presente manuale di istruzioni.
Page 31
3. 18 Costruzione del terminatore DMX 3. 19 Canali DMX 3. 20 Pixel layouts 4 Manutenzione 4. 1 Manutenzione e pulizia del sistema ottico 4. 2 Sostituzione fusibile 4. 3 Risoluzione dei problemi Contenuto dell'imballo: • SUNBAR2500MAX • Staffa di fissaggio • Manuale utente...
SUNBAR2500MAX ATTENZIONE! Prima di effettuare qualsiasi operazione con l’unità, leggere con attenzione questo manuale e conservarlo accuratamente per riferimenti futuri. Contiene informazioni importanti riguardo l’installazione, l’uso e la manutenzione dell’unità. SICUREZZA Avvertenze generali • I prodotti a cui questo manuale si riferisce sono conformi alle Direttive della Comunità Europea e per- tanto recano la sigla .
SUNBAR2500MAX è una barra stroboscopica grafica LED eccezionalmente potente, utilizzabile anche come blinder statico e flood. SUNBAR2500MAX offre un controllo flessibile del fascio attraverso un sistema di lenti intercambiabili, passando da 100° a 30° di raggio aumentando l’intensità della luce fino a 4 volte.
Page 34
SUNBAR2500MAX • Dimmer Curves:4 Different dimming curves available • Strobe/Shutter:1 - 30 Hz, electronic • Operating Temperature: -10° ~ +45° • Selectable PWM: 400~16K Hz ELECTRICAL • Power Supply: 100-240V – 50/60Hz • Power Consumption (at 230V):Full Static: 596 W Strobing 1060 W •...
SUNBAR2500MAX 1.3 ELEMENTI DI COMANDO E DI COLLEGAMENTO 1. BARRA LED 2. MANOPOLA DI FISSAGGIO per la staffa di montaggio. 3. STAFFA DI MONTAGGIO 4. PANNELLO DI CONTROLLO con display TFT e 4 pulsanti per l'accesso e gestione delle diverse funzioni.
- 2 - INSTALLAZIONE 2.1 MONTAGGIO Il SUNBAR2500MAX può essere collocato su un piano solido. Inoltre, grazie ai fori di fissaggio, l’unità può essere montata anche a testa in giù, su una traversa (fig.3). Per il fissaggio occorrono dei supporti robusti per il montaggio.
- 3 - FUNZIONI E IMPOSTAZIONI 3.1 FUNZIONAMENTO Per accendere il SUNBAR2500MAX inserire la spina del cavo di alimentazione in una presa di rete (100-240V~/50-60Hz). La testa mobile e tutti i motori di comando si mettono in una precisa posizione di partenza.
Page 39
SUNBAR2500MAX MENU ð Fixture ð iMMer iMMer iMMer iMMer ð An Mode 3 ADVANCED ð LED Frequency ð 400Hz 600Hz 800Hz 1200Hz 2000Hz 4000Hz 8000Hz 16KHZ ð Actory eloAd ð Apping otAtion 4 INFORMATION ð ð 0-9999 ixture ð 58 °c eMperAture ð...
• Premere il tasto MENU più volte per uscire dal menu e per salvare le modifiche apportate. 3.6 CONFIGURAZIONI MODALITA’ DMX SUNBAR2500MAX dispone di più configurazioni dei canali DMX a cui si può accedere dal pannello di con- trollo. • Premere il tasto MENU per accedere al menu principale.
Premere il tasto MENU più volte per uscire dal menu e per salvare le modifiche apportate. 3.12 FIXTURE Per il SUNBAR2500MAX è possibile accedere alle seguenti funzioni speciali: • Premere il tasto ENTER per accedere al menu principale. • Premere il tasto UP/DOWN per scorrere nel menu, selezionare Setup, quindi premere il tasto ENTER per accedere al menu successivo.
SUNBAR2500MAX Dimmer 3 - Il controllo dell’intensità della luce è più fine a livelli bassi e alti e livelli da grossolani a medi. - Fans Mode - Per impostare la modalità di funzionamento delle ventole. Premere il tasto UP/DOWN per selezionare la modalità Auto Speed/High Speed, quindi premere il tasto ENTER per confermare la scelta.
SUNBAR2500MAX 3.15 SEQUENCE L’unità può svolgere il suo programma Show autonomamente. Prima di inviare un programma automatico in esecuzione è necessario impostare l’unità come Master/Alone: • Premere il tasto ENTER per accedere al menu principale. • Premere i tasti UP/DOWN per scorrere nel menu, selezionare Stand Alone, quindi premere il tasto ENTER per accedere al menu successivo.
SUNBAR2500MAX 3.17 COLLEGAMENTI DELLA LINEA DMX La connessione DMX è realizzata con connettori standard XLR. Utilizzare cavi schermati, 2 poli ritorti, con impedenza 120Ω e bassa capacità. Per il collegamento fare riferimento allo schema di connessione riportato di seguito: DMX - INPUT...
SUNBAR2500MAX 3.19 CANALI DMX BASIC STATIC BASIC PIXEL FUNCTION FUNCTION CHANNEL CHANNEL Value Value DIMMER PIXEL 1 WHITE White 000 - 255 0~100% 000 - 255 PIXEL 2 WHITE 0~100% 000 - 255 PIXEL 3 WHITE 0~100% 000 - 255...
Page 47
SUNBAR2500MAX PIXELS - PIXELS PIXEL (ART-NET+DMX) FUNCTION MODE Value ART-NET ART-NET DIMMER Blackout 000 - 005 Min to Max 006 - 255 FLASH DURATION 15-990ms 000 - 255 FLASH RATE No Flash 000 - 010 Strobe slow to fast 011 - 255...
Page 48
SUNBAR2500MAX PIXELS - PIXELS PIXEL (ART-NET+DMX) FUNCTION MODE Value ART-NET ART-NET PIXEL 17 WHITE 0~100% 000 - 255 PIXEL 18 WHITE 0~100% 000 - 255 PIXEL 64 WHITE 0~100% 000 - 255 ADVANCED ADVANCED 1 ADVANCED ADVANCED 1 FUNCTION FUNCTION...
Page 49
SUNBAR2500MAX ADVANCED ADVANCED 2 ADVANCED ADVANCED 2 ART-NET+DMX FUNCTION ART-NET+DMX FUNCTION Value Value ART-NET ART-NET DMX ART-NET ART-NET DMX FLASH DIMMER DIMMER MODE 000 - 255 0~100% From MENU 000 - 051 Mode OFF 052 - 101 FLASH STROBE Mode 1...
Page 50
SUNBAR2500MAX ADVANCED ADVANCED 3 ADVANCED ADVANCED 3 CHANNEL CHANNEL FUNCTION BAS FUNCTION FUNCTION Value Value LAYER1 FX FLASH DIMMER LAYER2 DIMMER No Function 000 - 010 0~100% Strobe dimmer 000 - 255 FX 1 011 - 015 FLASH STROBE FX 2...
Page 51
SUNBAR2500MAX ADVANCED ADVANCED 3 CHANNEL FUNCTION Value LAYER2 FX No Function 000 - 010 FX 1 011 - 015 FX 2 016 - 020 FX 3 021 - 025 FX 4 026 - 030 FX 5 031 - 035 FX 6...
Page 52
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART-NET ART-NET DMX FLASH DIMMER LAYER2 DIMMER 0~100% Layer 2 dimmer 000 - 255 FLASH STROBE LAYER2 STROBE No flash/Closed No flash/Closed 000 - 030 Strobe slow to fast...
Page 53
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/ NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART- ART- LAYER1 STROBE No flash/Closed 000 - 030 Strobe slow to fast 031 - 100 Open 101 - 130 Random strobe slow to fast 131 - 200...
Page 54
SUNBAR2500MAX ADVANCED ADVANCED 4 ART/NET+DMX BASIC FUNCTION FUNCTION WITH L2 FX Value ART-NET ART-NET DMX LAYER2 FX No function 000 - 010 FX 1 011-015 FX 2 016-020 FX 3 021-025 FX 4 026-030 FX 5 031-035 FX 6 036-040...
Page 56
SUNBAR2500MAX - 4 - MANUTENZIONE 4.1 MANUTENZIONE E PULIZIA DEL SISTEMA OTTICO • Durante gli interventi, assicurarsi che l’area sotto il luogo di installazione sia libera da personale non qualificato. • Spegnere l’unità, scollegare il cavo di alimentazione ed aspettare finché l’unità non si sia raffreddata.
Page 57
SUNBAR2500MAX 4.3 RISOLUZIONE DEI PROBLEMI Anomalie Possibili cause Controlli e rimedi Mancanza di alimentazione di rete Verificare la presenza della tensione alimentazione • • Dimmer impostato a 0 Incrementare i valori del canale dimmer • • Tutti i colori impostati a 0...