Setting System Parameters; Setting The System Clock - Gamatronic MEGA V2 SA25 User Manual

8. S
ETTING SYSTEM PARAMETERS
There are several system parameters that can be modified as needed. In general, you only need
set these parameters once, during the first-time setup of the Mega V2 SA25.
8.1

Setting the system clock

The system clock is used in recording entries to the POWER+ event log. The clock should be set
to the correct time so that the log entries will reflect the true time of events.
To set the system clock:
1. From the main screen, press the Ent button to display the main menu.
2. On the main menu, select SET CLOCK and press Ent.
This displays the CLOCK screen, which shows the current time and date according to the
Mega V2 SA25 clock. The information is displayed in the format
HH:MM:SS
DD:MM:YYYY
3. To change the time and date, press Ent.
At any time in the following process you can press Esc to exit to the main screen. The
changes you made before pressing Esc are saved.
4. The SET MINUTES screen is displayed.
Use the UP/DOWN button to change the minutes setting.
5. Press Ent. The SET HOUR screen is displayed.
Use the UP/DOWN button to change the hours setting.
6. Press Ent. The SET DAY screen is displayed.
Use the UP/DOWN button to change the day setting.
7. Press Ent. The SET MONTH screen is displayed.
Use the UP/DOWN button to change the month setting.
8. Press Ent. The SET YEAR screen is displayed.
Use the UP/DOWN button to change the year setting.
9. Press Esc to exit to the main screen.
User Guide: MEGA V2 SA25, Release 1.5
Gamatronic Electronic Industries Ltd.
41