Firewall - Port Forwarding - Loopcomm LP-8186C User Manual

Firewall - Port Forwarding

Entries in this table allow you to automatically redirect common network services to a specific machine behind the
NAT firewall. These settings are only necessary if you wish to host some sort of server like a web server or mail server
on the private local network behind your Gateway's NAT firewall.
Item
Enable Port
Forwarding
Local IP Address
Protocol Port Range
Comment
Apply Changes
Reset
Delete Selected
Delete All
Reset
Description
Click to enable the Port Forwarding security
function.
To forward data packets coming from WAN to a
specific IP address that hosted in local network
behind the NAT firewall, fill in the IP address,
protocol, port range and your comments.
The Protocol can be TCP, UDP or Both.
The Port Range for data transmission.
Comments let you know about whys to allow data
packets forward to the IP address and port number.
Click the Apply Changes button to register the IP
address and port number to Port forwarding list.
Click the Reset button to abort change and recover
the previous configuration setting.
Click to delete the selected IP address and port
number that will be removed from the
port-forwarding list.
Click to delete all the registered entries from the
port-forwarding list.
Click the Reset button to abort change and recover
the previous configuration setting.
43