Loopcomm LP-8186C User Manual page 35

DNS 2
DNS 3
Clone MAC Address
Enable uPNP
Enable Ping Access on WAN
Enable Web Server Access on WAN
Enable IPsec pass through on VPN
connection
Enable PPTP pass through on VPN
connection
Enable L2TP pass through on VPN
connection
Apply Changes
Reset
PPPoE
Fill in the IP address of Domain Name Server
2.
Fill in the IP address of Domain Name Server
3.
Fill in the MAC address that is the MAC
address to be cloned.
Click the checkbox to enable uPNP function.
Click the checkbox to enable WAN ICMP
response.
Click the checkbox to enable web configuration
from WAN side.
Click the checkbox to enable IPSec packet
pass through.
Click the checkbox to enable PPTP packet
pass through.
Click the checkbox to enable L2TP packet pass
through.
Click the Apply Changes button to complete
the new configuration setting.
Click the Reset button to abort change and
recover the previous configuration setting.
34