Firewall - Ip Filtering - Loopcomm LP-8186C User Manual

Delete All
Reset

Firewall - IP Filtering

Entries in this table are used to restrict certain types of data packets from your local network to Internet through the
Gateway. Use of such filters can be helpful in securing or restricting your local network.
Item
Enable IP Filtering
Local IP Address
Protocol Comments
Apply Changes
Reset
Delete Selected
Delete All
removed from the port-filtering list.
Click to delete all the registered entries from the
port-filtering list.
Click the Reset button to abort change and recover
the previous configuration setting.
Description
Click to enable the IP filtering security function.
To restrict data transmission from local network on
certain IP addresses, fill in the IP address and the
protocol, also put your comments on it.
The Protocol can be TCP, UDP or Both.
Comments let you know about whys to restrict
data from the IP address.
Click the Apply Changes button to complete the
new configuration setting.
Click the Reset button to abort change and recover
the previous configuration setting.
Click to delete the selected port range that will be
removed from the IP-filtering list.
Click to delete all the registered entries from the
IP-filtering list.
41