Operation Mode; Wireless - Basic Settings - Loopcomm LP-8186C User Manual

Operation Mode

This page is used to configure which mode wireless broadband router acts.
Item
Gateway
Bridge
Wireless ISP
Apply Changes
Reset

Wireless - Basic Settings

This page is used to configure the parameters for wireless LAN clients that may connect to your Broadband Router.
Here you may change wireless encryption settings as well as wireless network parameters.
Description
Traditional gateway configuration. It always connects internet via
ADSL/Cable Modem. LAN interface, WAN interface, Wireless
interface, NAT and Firewall modules are applied to this mode
Each interface (LAN, WAN and Wireless) regards as bridge.
NAT, Firewall and all router's functions are not supported
Switch Wireless interface to WAN port and all Ethernet ports in
bridge mode. Wireless interface can do all router's functions
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the previous
configuration setting.
19