Site Survey; Wps Settings - Loopcomm LP-8186C User Manual

Delete Selected
Delete All
Reset

Site Survey

This page is used to view or configure other APs near yours.
Item
SSID
BSSID
Channel
Type
Encrypt
Signal
Refresh
Connect

WPS Settings

This page allows you to change the setting for WPS (Wi-Fi Protected Setup). Using this feature could let your wireless
client automically syncronize its setting and connect to the Access Point in a minute without any hassle.
Click to delete the selected clients that will be access right
removed from this WLAN Broadband Router.
Click to delete all the registered clients from the access
allowed list.
Click the Reset button to abort change and recover the
previous configuration setting.
Description
It shows the SSID of AP.
It shows BSSID of AP.
It show the current channel of AP occupied.
It show which type AP acts.
It shows the encryption status.
It shows the power level of current AP.
Click the Refresh button to re-scan site survey on the
screen.
Click the Connect button to establish connection.
28