Wireless - Access Control - Loopcomm LP-8186C User Manual

Wireless - Access Control

If you enable wireless access control, only those clients whose wireless MAC addresses are in the access control list
will be able to connect to your Access Point. When this option is enabled, no wireless clients will be able to connect if
the list contains no entries.
Item
Wireless Access
Control Mode
MAC Address
Comment
Apply Changes
Reset
Current Access
Control List
Delete Selected
previous configuration setting.
Description
Click the Disabled, Allow Listed or Deny Listed of drop
down menu choose wireless access control mode.
This is a security control function; only those clients
registered in the access control list can link to this WLAN
Broadband Router.
Fill in the MAC address of client to register this WLAN
Broadband Router access capability.
Fill in the comment tag for the registered client.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
It shows the registered clients that are allowed to link to this
WLAN Broadband Router.
Click to delete the selected clients that will be access right
25