Wireless - Security Setup - Loopcomm LP-8186C User Manual

Preamble Type
Broadcast SSID
IAPP
802.11g Protection
RF Power Level
ACK Timeout
Apply Changes
Reset

Wireless - Security Setup

This page allows you setup the wireless security. Turn on WEP, WPA, WPA2 by using encryption keys could prevent
any unauthorized access to your wireless network.
Item
Encryption
Use 802.1x
Authentication
rate can be auto-select, 11M, 5.5M, 2M or 1Mbps.
Click to select the Long Preamble or Short Preamble support
on the wireless data packet transmission.
Click to enable or disable the SSID broadcast function.
Click to enable or disable the IAPP function.
Protect 802.11b user.
Select the TX Power from 10-14dBm to 14-17dBm or
17-19dbm.
The Acknowledgement Timeout means from remote to local
data transmission, one parameter to control both
acknowledging action to guaranty those packets have
already be received. Usually, for short distance, keep default
setting is proposed. If there is long distance application, have
minor increased with this parameter will be proposed.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
Description
Select the encryption supported over wireless access. The
encryption method can be None, WEP, WPA, WPA2 or
WPA-Mixed.
While Encryption is selected to be WEP. Click the check box
to enable IEEE 802.1x authentication function.
22