Loopcomm LP-8186C User Manual page 24

WPA Authentication
Mode
WPA Cipher Suite
WPA2 Cipher Suite
Pre-Shared Key
Format
Pre-Shared Key
Enable
Pre-Authentication
Authentication
RADIUS Server
Apply Changes
Reset
While Encryption is selected to be WPA. Click to select the
WPA Authentication Mode with Enterprise (RADIUS) or
Personal (Pre-Shared Key).
Select the Cipher Suite for WPA encryption.
Select the Cipher Suite for WPA2 encryption.
While Encryption is selected to be WPA.
Select the Pre-shared key format from the pull-down menu.
The format can be Passphrase or Hex (64 characters).
[WPA, Personal(Pre-Shared Key) only]
Fill in the key value. [WPA, Personal(Pre-Shared Key)
only]
Click to enable Pre-Authentication.
[WPA2/WPA2 Mixed only, Enterprise only]
Set the IP address, port and login password information of
authentication RADIUS sever.
Click the Apply Changes button to complete the new
configuration setting.
Click the Reset button to abort change and recover the
previous configuration setting.
23