Advertisement
Step 4 – Installation into Vehicle
Place the assembled drawer unit into the vehicle in the
desired location. Align and square the unit as necessary.
Mark through the four holes of the floor mounts onto
the floor.
Remove the assembled unit.
BE SURE THE LOCATION MARKED IS A SAFE PLACE TO
DRILL INTO THE FLOOR.
NOTE: If the vehicle has a floor mat, a 1" hole-saw is
recommended to expose the metal floor.
DO NOT drill beyond depth of floor or upper
installation surface. Always check for wires, fuel
tanks and lines, brake lines and other important
vehicle functionality items prior to drilling and
installing all products.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 40150
Page 5
Advertisement
