Step 2 - Assemble Top Tray; Step 3 - Assemble Floor Mounts - Kargo Master 40150 Instruction Manual

Step 2 – Assemble Top Tray
 On the top-drawer unit, place
the tray so the holes from
both units align. If the holes
do not align, drill through the
top tray and into the drawer
unit using a 1/8" bit in the
desired locations.
 Once the top tray is in the
desired location, screw into
place using four #14 screws.
 Tighten.
Step 3 – Assemble Floor Mounts
 Align and attach the floor mounts with the holes in the side of the bottom drawer unit
using #14 screws as shown. Repeat on both sides.
 Tighten.
For Technical Support Call: 800-343-7486, Monday-Friday, 7AM - 4 PM (PST)
Instructions – 40150
Page 4