Instructions – 40552 *PLEASE READ ALL INSTRUCTIONS AND WARNINGS PRIOR TO ASSEMBLING, INSTALLING, AND USING THIS PRODUCT* Warning Always check for wires, fuel tanks and lines, brake lines and other important vehicle functionality items prior to drilling and installing all products.
Instructions – 40552 Step 1 – Assemble Shelf Have desired shelf unit built. Be sure the top shelf is on the highest notch and oriented with shelf lip down as shown. Step 2 – Prepare Shelf Unit Access rear of shelf unit.
Instructions – 40552 Step 3 – Install Back Splash Place back splash over previously removed screws. Re-install screws leaving the middle hole in back splash vacant. Snug Tighten. For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST)
Instructions – 40552 Step 4 – Install Bench Top Place bench top on top of shelf as shown. Align bench top to desired location. Screw bench top to back splash using a No.10 screw. On bottom side of shelf, find four appropriate mounting holes.
Page 7
Instructions – 40552 GO BACK AND ENSURE ALL HARDWARE IS TIGHT Installation is now complete For Technical Support Call: 800-343-7486 Monday-Friday 7AM - 4 PM (PST) Page 6...