Post & Boot - Advantech MIC-3399 User Manual

2.3.5 Post & Boot
Select the Post & Boot tab to enter the Post & Boot setup page. Users can select any
item in the left frame of the screen to access the submenu for that item.
Setup Prompt Timeout

This item allows users to configure the number of seconds to wait for a setup
activation key. 65535 (oxFFFF) means indefinite waiting.
Boot Up NumLock State

This item allows users to select the keyboard numlock state. When set to on, the
keyboard numlock state will stay on after booting. When set to off, the keyboard
numlock state will stay off after booting.
Quiet Boot

This item allows users to enable/disable the quiet boot option. If this option is
disabled, the BIOS will display normal POST messages. If enabled, an OEM
logo will be displayed instead of POST messages.
Network Stack

This item allows users to enable/disable the UEFI network stack.
Boot Option

This item allows users to view the boot priority of devices.
Boot Option #1
Boot Option #2
Boot Option #3
Hard Drive BBS Priorities

This item allows users to set the boot device priority sequence from the avail-
able hard disk drives.
MIC-3399 User Manual
Figure 2.31 Post & Boot BIOS Setup Page
46