Boot Settings - Advantech MIO-5290L User Manual

3.5

Boot Settings

Setup Prompt Timeout
This item allows users to select the number of seconds to wait for setup activation
key.
Bootup NumLock State
Select the Power-on state for Numlock.
Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
GateA20 Active
This item allows to select upon request or always for GateA20.
Option ROM Message
Set display mode for option ROM.
INT19 Trap Response
This item allows option ROMs to trap interrupt 19.
CSM Support
This item allows users to enables or disables CSM support.
MIO-5290 User Manual
Figure 3.29 Boot Setup Utility
44