Advantech MIC-3399 User Manual page 27

1. Attach the HDD brackets to the side of HDD and use 4 x M3 screws to fasten
them in place.
Figure 1.5 Attach the SATA HDD to the HDD brackets
2. Install the SATA HDD attached to the brackets into the chassis. Connect the
SATA HDD to the SATA connector. Fasten the HDD in place using 4 x M2.5
screws as show in Fig. 1.6.
Figure 1.6 Installing the SATA HDD into the Chassis
15 MIC-3399 User Manual