Selecting Operation Mode - D-Link DSL-2740U User Manual
Wireless adsl2+ router with ethernet wan support
Hide thumbs
Also See for DSL-2740U:
- User manual (146 pages) ,
- Quick installation manual (39 pages) ,
- Setup manual (4 pages)
Table of Contents
Advertisement
DSL-2740U Wireless ADSL2+ Router with Ethernet WAN Support
User Manual
Selecting Operation Mode
In order to connect your device to an ADSL line, on the Device mode page, from the
Connection method list, select the ADSL value. In this mode you can configure a WAN
connection, set your own settings for the wireless network, configure LAN ports to connect an STB
or VoIP phone, and set your own password for access to the web-based interface of the device.
Figure 25. Selecting an operation mode. The ADSL connection method.
In order to connect your device to an Ethernet line, on the Device mode page, from the
Connection method list, select the Ethernet value. In this mode you can configure a LAN port
as a WAN port, configure a WAN connection, set your own settings for the wireless network,
configure LAN ports to connect an STB or VoIP phone, and set your own password for access to the
web-based interface of the device.
Figure 26. Selecting an operation mode. The Ethernet connection method.
When the operation mode is selected, click the NEXT button.
Page 36 of 174
Configuring via Web-based Interface
Advertisement
Table of Contents
