Maxx Ice MIM50-0 Instruction Manual page 8

INSTALLATION
** The ice maker should always be plugged into its own individual electrical outlet. **
It is recommended that a separate circuit, serving only your ice maker, be provided.
Use receptacles that cannot be turned off by a switch or pull chain.
The fuse (or circuit breaker) size should be 15 amperes.
Recommended grounding method
For your personal safety, this appliance must be grounded. It is equipped with a
power supply cord having a 3-prong grounding plug. To minimize a possible shock
hazard, the cord must be plugged into a mating 3-pronged and grounding-type wall
receptacle, grounded in accordance with the National Electrical Code and local
codes and ordinances. If a mating wall receptacle is not available, it is the personal
responsibility of the customer to have a properly grounded, 3-prong wall receptacle
installed by a qualified electrician.
Installation of Casters
Casters are provided with
the ice maker. They are
ideal for rolling the unit
from place to place out-
doors. If a mobile installa-
tion is chosen, you must
install the casters.
Use two or more people when installing or removing casters
• Tip unit to the right so there is a 3/4-foot clearance at the left of the unit. Have
someone to assist you in tilting the unit, to prevent it from falling on you while installing
the casters.
• Screw one of the casters with lock in the front screw impression and screw one of
the casters without lock in the back screw impression.
• Repeat the two steps above with the exception of tipping the unit to the left
now, to screw in the other two casters.
• The casters are now installed.
• The unit should be level. If the floor conditions do not allow the unit to sit level, ad-
just the wheel by turning the required wheel counter-clockwise to increase their
height and clockwise to reduce their height.
7
c S Screw holes s e e r w ho l