Section 8 Getting Started - Saadat Dena 640 User Manual

Section 8- Getting Started
8-1 Open the package.
Open the package and take out the electrocardiograph and accessories carefully. Keep the package
for possible future transportation or storage.
■ Check the device for any mechanical damage.
■ Check existence of accessories and contents according the following checklist:
If there is any problem, contact the distributor immediately.
8-2 Connect the power cable to the device.
■ Make sure the AC power supply complies with the following specification:
100-240 VAC, 50 /60Hz.
■ Plug the power cable to the power supply socket of the device. Connect the other end of the power
cable to a grounded power receptacle.
Electrocardiograph device
Patient cable
Recorder thermosensitive paper
Limb electrode (wrist electrode
clamping)
Chest electrode (suction bulb)
Gel
Power cable
User manual
Guarantee card
Calibration certificate
1 unit
1 piece
1 roll
Set of 4
Set of 6
1 packet
1 piece
53