Table of Contents
Advertisement
intended to aware user that the paper is near to finish. Otherwise
user should ensure that sufficient paper has been fed to the
recorder before recording.
The following information are printed on the recorder paper:
■ Recording type (Auto, Manual, Periodic)
■ Recording mode
■ Date and time
■ Patient information
■ HR value
■ Recording speed
■ ECG lead, gain and filter
■ Hospital/ward
■ Physician name
■ System model
■ Software version
Recorder Cleaning
Accumulation of paper powder or foreign matter between the thermal head and platen roller reduces
the print quality. Clean the head elements and platen roller surface using a cloth moistened with
alcohol. Wait until the alcohol dries, then close the recorder door.
because thermal head and its surrounding area are hot during
and after recording.
recorder.
It is recommended to use the paper with coloured marks
Do not clean the recorder immediately after recording
Do not use sandpaper or other sharp objects for cleaning the
50
Advertisement
Table of Contents
