Using A Power Adaptor - Microlife WatchBP Office Vascular Instruction Manual

Using a power adaptor

Only use the Mains Adaptor supplied with the
device to recharge the device.
1) Plug the adaptor cable into the power
socket of the device.
2) Plug the adaptor plug into the wall socket.
The battery will be recharged if the device
is attached to an AC power source. After
the battery is fully recharged, the charging
will stop. No battery power will be used if
the adaptor is plugged in. The battery must
always remain within the device even when
using AC power.
3) If the battery starts losing capacity, contact
your local dealer for battery replacement.
The battery can be replaced.
* The External Power icon always shows on LCD display when the adapter is used.
WatchBP Office
DC 7.5V 1.5A
DC 7.5V 1.5A
Mode button to select the mode
17
EN