Mechanical installation
6.3
Move the socket
Preliminary requirements
Procedure
1. Remove 2 screws and remove the
2. Remove 11 screws and remove
3. Remove the screw(A) on the left
4. Move the socket away.
6.4
Install the upper mounting screws
Preliminary requirements
Procedure
1. Install the mounting screws (A)
2. Lock the screws in the plugs. For
30
1.
The plugs for the
mounting screws are
installed.
front cover.
the maintenance door.
side of socket.
1.
The plugs for the upper
and lower mounting
screws are installed.
through the holes (B) in the
charger.
the specification, refer to section
10.7.
•
Screwdriver
•
Mounting screws. Refer
to section 10.6.