•
Wall frame
•
Frontal cover
•
Bottom grid cover
5.3
Move cabinet to position
5.3.1
Options
A properly rated lifting devices should be used to move the Terra DC Wallbox from the delivery truck to the
installation location.
5.4
Mounting the Terra DC Wallbox
Preconditions:
•
Tools: Spanners size 17.
•
Guide the power cable through the central cable gland, and the Ethernet cable if required, through
the smaller gland. Or install wiring in the conduit/raceway that is connected to the unit. See below
image for a typical conduit install make ready for installation of the Wallbox.
•
2 0 2 0- 0 8- 0 6
DANGER
Hazardous voltage
Ensure the product's power supply group main switch is set to the OFF
position. Perform a voltage check to verify there is no electrical power on
the cables or on the system. Secure the product from resetting.
NOTICE
Warranty
Damage due to moving the cabinet to its position is not considered a
warranty issue.
TER R A DC WAL LB OX
2 3 / 41