2.3.7 Audio
Volume
Adjusts the volume of built-in speaker and headphone, selectable range: 0-100. Default is 50.
Mute
Disable any sound output when turn it off.
Level Meter
To achieve optimum audio quality, ensure the audio levels do not reach 0.
This is the maximum level, meaning that any audio that exceeds this level will
be clipped, resulting in distortion. Ideally peak audio levels should fall in the
upper end of the green zone. If the peaks enter into the yellow or red zones,
the audio is in danger of clipping.
Audio Source
Selectable range: SDI1/SDI2/HDMI1/HDMI2/TYPE-C, Full Screen or Vertical
mode default to current audio source, Multiview mode defaults to SDI1
17