2.3.2 Multiview
To set the multiview mode, preset values for the input signal and switch between different signals.
PGM source: default value is SDI1/SDI2/HDMI1/HDMI2/TYPE-C, select the source for PGM output.
PVW source: default value is SDI1/SDI2/HDMI1/HDMI2/TYPE-C, select PVW preview signal source,
through the [PGM Cut] function can realize the PGM source and PVW source signal switch each other.
Note!
The PGM source is marked with a red frame and PVW source is marked with a green frame
PGM Frame: default is 60p/50p/30p/25p/24p, select the source frame rate for PGM output
Multiview Mode:
Full Screen
Horizontal screen)
(
8
Vertical (Vertical screen)