Icom IC-M502AW Instruction Manual page 32

6
DSC OPERATION
D D Transmitting Position Request call
Transmit a Position Request call when you want to know a
specific ship's current position, etc.
q Push
[
[
DSC/ENT DSC/ENT
w Rotate
[
[
CHANNEL CHANNEL
[ ] .
[ ]
DSC/ENT
DSC/ENT
Sel Item
Group
All ships
˘POS Request
e Rotate
[
[
CHANNEL CHANNEL
grammed individual address or "Manual Input," push
[ ] .
[ ]
DSC/ENT
DSC/ENT
• The ID code for the Position Request call can be set in advance.
(p. 14)
• When "Manual Input" is selected, set the 9-digit ID code
(1st digit must not be '0') for the individual you wish to call by
[
using [
CHANNEL CHANNEL
- Push [ [ CH/WX]
CH/WX
- After 9-digit is input, push
Sel Address
Manual Set
Ricky
˘Tom
26
] to enter the DSC menu.
]
] to select "POS Request," push
]
] to select the desired pre-pro-
]
]
] .
] or [ [ ] for cursor movement. ]
SCAN
SCAN
[ ]
[ ] to set the ID code.
DSC/ENT
DSC/ENT
r Push
[ ] to transmit the Position Request call.
[ ]
DSC/ENT
DSC/ENT
To Call,
[DSC/ENT]
To Cancel
[other]
t After the Position Request call has been transmitted, the
following indication is displayed.
POS REQ
Completed
Wait for ACK
y Push any key to exit the condition and return to the normal
operation.