Icom IC-M502AW Instruction Manual page 30

6
DSC OPERATION
D D Transmitting Group call
The Group call function allows you to transmit a DSC signal
to a specific group only.
q Push
[
[
DSC/ENT DSC/ENT
w Rotate
[
[
CHANNEL CHANNEL
[ ] .
[ ]
DSC/ENT
DSC/ENT
Sel Item
Individual
INDV ACK
˘Group
e Rotate
[
[
CHANNEL CHANNEL
grammed group address or "Manual Input," push
[ ] .
[ ]
DSC/ENT
DSC/ENT
• The ID code for the Group call can be set in advance. (p. 14)
• When "Manual Input" is selected, set the 9-digit ID code
(must be set to '0') for the group you wish to call by using
[ [ ] . ]
CHANNEL
CHANNEL
- Push [
[ CH/WX]
CH/WX
- After 9-digit is input, push
Sel Address
Manual Set
Smith Grp
˘Osaka Grp
24
] to enter the DSC menu.
]
] to select "Group,"
]
] to select the desired pre-pro-
]
] or [ ] for cursor movement.
[ ]
SCAN SCAN
[ [ ] to set the ID code. ]
DSC/ENT
DSC/ENT
r Rotate
[
[
CHANNEL
CHANNEL
or "Manual Input," push
• When "Manual Input" is selected, rotate
lect the desired channel other than Channel 70, push
push
Sel Channel
13
67
˘72
t Push
[
[
DSC/ENT DSC/ENT
• If Channel 70 is busy, the transceiver stands by until the channel
becomes clear.
To Call,
[DSC/ENT]
To Cancel
[other]
y After the Group call has been transmitted, the display
changes to the previously selected channel.
Group
Completed
u Push and hold
responding ship or push
] to select a desired intership channel
]
[ ] .
[ ]
DSC/ENT
DSC/ENT
[
[
CHANNEL CHANNEL
] to transmit the Group call.
]
[ [ ] to communicate your message to the ]
PTT
PTT
[ ] to exit the condition.
[ DSC/ENT ]
DSC/ENT
] to se-
]
[ [ ] . ]
DSC/ENT
DSC/ENT