Icom IC-M502AW Instruction Manual page 25

D D Normal call
The nature of the Distress call should be included in the Dis-
tress call.
q Push
[ ] to enter the DSC menu.
[ ]
DSC/ENT DSC/ENT
w Rotate
[ ] to select "DTRS
[ ]
CHANNEL CHANNEL
[ ] .
[ ]
DSC/ENT
DSC/ENT
Sel Item
POS Report
RCV Calls
˘DTRS Set
e Rotate
[ ] to select the nature of the distress,
[ ]
CHANNEL CHANNEL
push [ ] .
[ ]
DSC/ENT DSC/ENT
• 'Undesignated,' 'Explosion,' 'Flooding,' 'Collision,' 'Grounding,'
'Capsizing,' 'Sinking,' 'Adrift (Disable adrift),' 'Abandoning (Aban-
doning ship),' 'Piracy (Piracy attack)' and 'MOB (Man overboard)'
are available.
• The selected nature of the distress is stored for 10 minutes after
programming is finished.
Sel Nature
Undesign
˘Explosion
Flooding
When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is con-
nected, next steps r, t (Current position/time program-
ming) do not appear. Go to step y. (next page)
r The position information appears. Set the current posi-
tion, push
Set," push
• Edit the digit of your position data by using
- Push
- After editing latitude data, select "N"; North latitude or "S";
South latitude.
- After editing longitude data, select "E"; East longitude or "W";
West longitude.
- Push
t The time information appears. Set the current UTC time,
push
• Edit the digit of the current UTC time by using
- Push
- Push
DSC OPERATION
[ ] .
[ ]
DSC/ENT
DSC/ENT
Input POS
° .
- ° .
Null˘[H/L]
[ ] or [ ] for cursor movement.
[ CH/WX] CH/WX [ SCAN ]
SCAN
[ [ ] to clear the position data. ]
HI/LO
HI/LO
[ ] .
[ ]
DSC/ENT
DSC/ENT
Input time
UTC :
Null˘[H/L]
[ [ CH/WX] ] or [ [ ] for cursor movement. ]
CH/WX SCAN
SCAN
[ ] to clear the time data.
[ ]
HI/LO
HI/LO
6
6
[ ] .
[ ]
CHANNEL CHANNEL
[ ] .
[ ]
CHANNEL CHANNEL
19