Procedure
1. Power down the server.
2. Extend the server from the rack.
3. Disconnect the cabling and remove the server from the rack. For more information, see the documentation
that ships with the rack mounting option.
4. Place the server on a sturdy, level surface.
Access the product rear panel
Releasing the cable management arm
Release the cable management arm and then swing the arm away from the rack.
Accessing the Systems Insight Display
The Systems Insight Display is only supported on SFF models. To access a Systems Insight Display, use the
following procedure.
Procedure
1. Press and release the panel.
2. After the display fully ejects, rotate the display to view the LEDs.
Removal and replacement procedures
43