Model Optimizer Configuration Steps - IEI Technology Mustang-V100-MX4 User Manual

manually configure the Model Optimizer instead of using scripts, see the Using Manual
Configuration Process section in the Model Optimizer Developer Guide.
For more information about the Model Optimizer, see the
Guide.

5.3.4.1 Model Optimizer Configuration Steps

You can configure the Model Optimizer either for all supported frameworks at once or for
one framework at a time. Choose the option that best suits your needs. If you see error
messages, make sure you installed all dependencies.
IMPORTANT: The Internet access is required to execute the following steps successfully.
If you have access to the Internet through the proxy server only, please make sure that it is
configured in your environment.
NOTE: In the steps below:
• If you you want to use the Model Optimizer from another installed versions of
Intel® Distribution of OpenVINO™ toolkit installed, replace openvino with
openvino_<version>.
If you installed the Intel® Distribution of OpenVINO™ toolkit to the non-default
•
installation directory, replace C:\Program Files (x86)\IntelSWTools with the
directory where you installed the software.
These steps use a command prompt to make sure you see error messages.
Option 1: Configure the Model Optimizer for all supported frameworks at the same
time:
1. Open a command prompt. To do so, type cmd in your Search Windows box and then
press Enter. Type commands in the opened window:
Page 56
Mustang-V100-MX4
Model Optimizer Developer