Lever Removal - SRAM RockShox SIDLuxe 2024+ Service Manual

L e v e r R e m o v a l
1 Loosen the lever limit screw. Remove the lever.
2 Remove the flat point screw from the frontside of the eyelet.
Remove the limit screw from the backside of the eyelet.
3
Remove the detent spring and preloader from the backside of the
eyelet.
Remove the outer cam bushing from the frontside of the eyelet.
4 Push the lock cam and inner cam bushing out of the eyelet.
1.5 mm
2 mm 1.5 mm
14

Lever Removal