Utility Settings - PIONEER DJ DJM-V10-LF Manual

Utility settings

Setting items
1
BALANCE
1
MASTER OUT
PEAK LIMITER
ATT.
MONO/STEREO
DIGITAL MASTER OUT
REFERENCE LEVEL
SAMPLING RATE
Descriptions
Sets the output balance.
• Setting values: L128 to 0* to R127
Reduces distortion to the sound output from the [MASTER1]
and [MASTER2] terminals.
• Setting values: OFF, ON*
Sets the attenuation level for the sound output from the
[MASTER1] and [MASTER2] terminals.
• Setting values: –12dB, –9dB, –6dB, –3dB, 0dB*
Sets the output method (mono/stereo) for the sound output
from the [MASTER1] and [MASTER2] terminals.
• Setting values: MONO, STEREO*
1
Sets the output level for when the master level indicator
lights up at [0] dB.
• Setting values: –30dBFS, –27dBFS, –24dBFS, –21dBFS*,
–18dBFS, –15dBFS, –12dBFS, –9dBFS, –6dBFS
• Note that sound may be distorted even when the master
level indicator does not show the maximum level.
Sets the sampling rate for the digital signal.
• Setting values: 44.1kHz, 48kHz, 88.2kHz, 96kHz*
70
Settings
*: Factory setting