PIONEER DJ DJM-V10-LF Manual page 10

• Remove the short-circuit pin plugs from the terminals when connecting devices.
When you are not using the terminals, attach the short-circuit pin plugs to cut out
external noises.
WARNING
Keep the short-circuit pin plugs out of the reach of children and infants. If accidentally
swallowed, contact a doctor immediately.
LINE terminals (RCA) (page 20)
5.
Connect multi players or line-level output devices.
MIC1 terminal (XLR or 1/4"/6.35 mm, TRS), MIC2 terminal (1/4"/6.35 mm, TRS)
6.
(page 20)
Kensington security slot
7.
Connect a cable lock.
MIDI OUT (5-pin DIN) (pages 21, 67)
8.
LINK terminal (pages 7, 20)
9.
Connect to a LINK terminal on a PC/Mac running rekordbox or a PRO DJ LINK
compatible multi player.
• Use a switching hub (100BASE-TX compatible type) to connect multiple devices.
10. DIGITAL IN CH terminals (RCA) (page 20)
Connect to a digital coaxial output terminal on a multi player, etc.
• Sound may break when the output signal's sampling frequency changes.
11. DIGITAL MASTER OUT terminal (XLR (AES/EBU)) (page 21)
Connect to a digital terminal on a preamplifier, etc.
Outputs the master sound in AES/EBU format.
• Do not connect to an analog input terminal or connect a power cord from another
product to this terminal.
12. BOOTH terminals (1/4"/6.35 mm, TRS) (page 21)
Connect a booth monitor.
• If you connect equipment to the [L (MONO)] terminal only, mono sound is output.
13. MASTER1 terminals (balanced XLR) (page 21)
Connect to analog input terminals on a power amplifier, etc.
• Use the terminals for balanced output only.
• Do not connect a power cord from another product to the terminals.
10
Part names