Table of Contents
Advertisement
ON/OFF button
9.
Turns on and off BEAT FX. The button blinks when it is turned on.
Touch display
AUTO/TAP
1.
Selects a BPM measuring mode.
Changes the highlighted (selected) item with each touch.
— [AUTO] : Automatically measures the BPM of the input sound (measuring range:
70 to 180).
— [TAP] : Manually sets a BPM (page 59).
• [AUTO] is automatically set when you turn the unit on.
• Touch and hold [AUTO/TAP] when [TAP] is selected to display the [BPM SETTING]
screen and set a BPM in increments of 0.1.
• The BPM value blinks when it cannot be measured correctly in the [AUTO] setting.
Use the [TAP] mode if this happens.
2.
QUANTIZE
Indicates the status of the Quantize function as follows.
— Lights up in red: The function is turned on.
— Displays [QUANTIZE] and [NO GRID] alternately: Quantize is turned on, but the
unit is not receiving the grid information.
— Lights up in gray: Quantize is turned off.
• The unit may not receive the grid information depending on the playback status of a
connected multi player (e.g. if it is off air, scratching, playing in reverse, etc.).
1
2
3
4
5
56
Beat FX
6
Advertisement
Table of Contents
