Using Multi I/O - PIONEER DJ DJM-V10-LF Manual

LEVEL knob
6.
Adjusts the volume for the MULTI I/O effect sound.
ON/OFF button
7.
Turns on and off MULTI I/O. The button blinks when it is turned on.

Using Multi I/O

1 Press the [MODE] selector button to select an external FX unit
and effect input method.
2 Turn the [CH SELECT] switch to select a channel to add the
MULTI I/O effect to.
3 Press the [ON/OFF] button to turn on MULTI I/O.
4 Turn the [LEVEL] knob to adjust the volume for the MULTI I/O
effect sound.
• Press the [ON/OFF] button again to turn off MULTI I/O.
• MULTI I/O turns off automatically in the following situations.
– The unit is not connected with an external FX unit.
– [CH 2/CH 5] is selected with the [MODE] selector button, a channel from [1] to [6] is
selected with the [CH SELECT] switch, and [MULTI I/O] is selected with the input
selector switch for the selected channel.
– [CH 2/CH 5] is selected with the [MODE] selector button, and [MASTER] is selected
with the [CH SELECT] switch.
53
Multi I/O