Table of Contents
Advertisement
Changing the settings
Setting preferences
*: Default setting
Setting items
MASTER OUT
MIDI
OLED BRIGHTNESS
PC UTILITY
AUTO STANDBY
FACTORY RESET
Change Procedure
1 While pressing [SEND/RETURN ON/OFF] button,
press the [POWER] button.
The [UTILITY] screen is displayed.
2 Press the [BEAT c, d] button.
Select the setting item.
3 Press the [TAP] button.
The mark is moved to the detail setting.
4 Press the [BEAT c, d] button.
Select a detail setting.
5 Press the [TAP] button.
The detail settings are set, then the mark is moved to the setting item.
! To return to the previous screen without changing the settings, press
the [TAP] button.
6 Press the [SEND/RETURN ON/OFF] button.
The [UTILITY] screen closes.
About the auto standby function
When [AUTO STANDBY] is set to [ON], the unit automatically enters
the standby mode if 10 hours elapses with all of the following conditions
met.
— That none of this unit's buttons or controls are operated.
— That no audio signal is input to each channel of this unit.
! In the standby mode, the [WAKE UP] indicator is lit.
! When the [TAP] button is pressed, the standby mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
About the setting utility software
The setting utility can be used to make the checks and settings
described below.
— Check the status of this unit's input selector switches.
— Set the audio data output from this unit to the computer.
— Adjust the buffer size (when using Windows ASIO).
— Check the version of the firmware and driver software.
22
En
Detail setting items
PEAK LIMITER
ATT.
MONO/STEREO
CH
BUTTON TYPE
—
—
—
—
Setting value
OFF, ON*
–12 dB, –6 dB, 0 dB*
MONO, STEREO*
1* to 16
TOGGLE*, TRIGGER
1 to 3*
OFF*, ON
OFF, ON*
CANCEL/RESET
Displaying the setting utility
For Mac OS X
Click [Macintosh HD] icon > [Application] > [Pioneer] > [DJM-450]
> [DJM-450 Settings Utility].
For Windows 10/8.1
In [Apps view], click the [DJM-450 Settings Utility] icon.
For Windows 7
Click [Start] menu > [All Programs] > [Pioneer] > [DJM-450] > [DJM-
450 Settings Utility].
Checking the status of this unit's input
selector switches
Display the setting utility before starting.
Click the [MIXER INPUT] tab.
! [FX RETURN] can be used with compatible software.
Descriptions
This decreases digital clips.
Set the decreasing level of sound output from the
[MASTER1] and [MASTER2] output terminals.
Set to monaural or stereo for the master output sound.
Set the MIDI channel.
Set the MIDI signal transmission mode to [TOGGLE] or
[TRIGGER].
Set the display's brightness.
Set whether or not to launch the computer's setting utility
software automatically when a USB cable is connected.
Turn the auto standby function on and off.
All settings are set to their defaults.
Advertisement
Table of Contents
