Using Beat Fx - PIONEER DJ DJM-V10-LF Manual

Using Beat FX

Read more: Beat FX types and settings (page 60)
1 Touch [AUTO/TAP] or [QUANTIZE] to select a BPM measuring
mode.
2 Turn the BEAT FX selector switch to select an effect.
The selected BEAT FX screen appears.
3 Press the [BEAT FX ASSIGN] button to select a channel to add
the effect to.
4 Press the [BEAT /] buttons to set a beat fraction to
synchronize the effect sound with.
5 Press the [FX FREQUENCY (LOW, MID, HI)] buttons to select
the band to add the effect to.
6 Turn the [TIME] and [LEVEL/DEPTH] knobs to adjust the effect
settings.
7 Press the [ON/OFF] button (or touch the [X-PAD]) to turn on
BEAT FX.
The effect is added to the selected channel.
• Press the [ON/OFF] button again to turn off BEAT FX.
58
Beat FX