PIONEER DJ DJM-V10-LF Manual page 16

Setting the audio data output from the unit to a PC/Mac
1 Click the [MIXER OUTPUT] tab.
2 Click the pull-down menu under [Mixer Audio Output] and
select the audio data output from the unit to the PC/Mac.
Read more: [Mixer Audio Output] pull-down menu (page 19)
3 Click the pull-down menu under
select a level of volume output from the unit.
• Set the volume in [USB Output Level] when you cannot produce as much volume as you
expect using the volume adjustment in your DJ application. Note that the sound may be
distorted if you set the volume too high.
[USB Output Level] and
16
PC/Mac setup