Filter
You can adjust the cut-off frequency.
The selected filter is applied to all channels, [1] to [6].
Filter section
1
2
1.
FILTER (LPF, HPF) buttons
Select a filter. The selected button blinks.
— [LPF]: Low Pass Filter
— [HPF]: High Pass Filter
RESONANCE knob
2.
Adjusts the resonance. Turning the knob clockwise increases the resonance.
FILTER knob
3.
Adjusts the cut-off frequency.
The setting changes according to the selected [FILTER (LPF, HPF)] button as follows.
— [LPF]: Turning the knob clockwise decreases the cut-off frequency.
— [HPF]: Turning the knob clockwise increases the cut-off frequency.
3
41