Routing Effect Sounds To The Master Output - PIONEER DJ DJM-V10-LF Manual

Routing effect sounds to the master output

You can route the effect sound of one of the built-in FX or an external FX unit to the master
output.
EXT 1 EXT 2
Read more: Send types and settings (page 48)
1 Press the [MASTER MIX] button to turn on MASTER MIX.
2 Press the [SEND] button to select the effect.
• If you are using an external FX unit, skip to step 6.
3 Turn the [SIZE/FEEDBACK] knob to adjust the quantitative
parameter for the effect.
4 Turn the [TIME] knob to adjust the time parameter for the
effect.
External
FX units
DJM-V10-LF
BUILT-IN
SEND
MASTER ISOLATOR/Master volume
46
Input
Output
CH
TRIM/EQ/FILTER
Channel fader
Send