PIONEER DJ DJM-V10-LF Manual page 27

— [EXT1] : Selects the effect sound of a device connected to the [EXT1 RETURN]
terminals.
— [EXT2] : Selects the effect sound of a device connected to the [EXT2 RETURN]
terminals.
— [BUILT-IN, EXT1, EXT2] : Selects the effect sounds of all [SEND] buttons ([BUILT-
IN] and [EXTERNAL] buttons).
TRIM knob
2.
Adjusts the volume for the channel input sound.
COMP knob
3.
Adjusts the compression level.
Turning clockwise increases its effect.
Turning all the way counterclockwise outputs the original sound.
4. EQ (HI, HI MID, LOW MID, LOW) knobs
Adjusts the volume of each band.
Each knob adjusts in the following range.
— [HI] : –∞ dB to +6 dB
— [HI MID] : –26 dB to +6 dB
— [LOW MID] : –26 dB to +6 dB
— [LOW] : –∞ dB to +6 dB
Channel level indicator
5.
Displays the volume level before the sound passes through the channel fader.
FILTER knob (page 41)
6.
BEAT FX ASSIGN button (page 55)
7.
8. SEND knob (page 43)
CUE A button (page 35)
9.
10. CUE B button (page 35)
11. Channel fader
Adjusts the volume for the channel output sound according to the channel fader curve
specified via [CH FADER CURVE] (page 30). You can control the volume depending on
the scale of the channel fader.
27
Audio output