Lcd Display - PIONEER DJ DJM-V10-LF Manual

 Sound is distorted when a turntable is connected to the
[PHONO] terminals on the unit.
The status of the channel level indicator does not change
when you turn the [TRIM] knob.
• Check if the connected turntable has a built-in phono equalizer (if it does, connect the
turntable to the [LINE] terminals).
• If the turntable has a PHONO/LINE selector switch, set it to PHONO.
• If the audio interface for PC/Mac, which is connected between the unit and the turntable, is
a line-level device, connect the audio interface to the [LINE] terminals.

LCD display

• Small black or shining points may appear on the LCD display. This is a phenomenon
inherent to LCD displays and not a malfunction.
• When using the unit in cold places, the LCD display may be dark for a while after the power
is turned on. Normal brightness will restore after a while.
• When the LCD display is exposed to direct sunlight, the light will reflect off it, making it
difficult to see. Block the direct sunlight to improve visibility of the display.
Cleaning
Wipe with a dry soft cloth
• Do not use organic solvents, acids or alkalis for cleaning.
Touch display
• Operate the touch display with your fingertip. Do not press it with excessive force.
• Do not operate the touch display with hard and sharp-pointed objects such as a ballpoint
pen, mechanical pencil, or sharp fingernail.
Additional information
87