Auto standby function
When the auto standby function is turned on, the power is automatically
set to standby mode after four hours have passed with all of the follow-
ing conditions met.
— None of this unit's buttons or controls are operated.
— That this unit's channel level indicator is not lit.
— That the playback function is not operating.
— That no PRO DJ LINK connections are made.
— That no USB device is connected to the USB device insertion slot
(Type A terminal) on the unit's top panel.
— That no computer is connected to the [
terminal) on the unit's rear panel.
! When the [MASTER REC (WAKE UP)] button is pressed, standby
mode is canceled.
! This unit is shipped with the auto standby function turned on. If you
do not want to use the auto standby function, set [AUTO STANDBY]
to [OFF].
Setting preferences
Option settings
Setting ranges
LOAD LOCK
LOCK/UNLOCK*
NEEDLE LOCK
LOCK*/UNLOCK
QUANTIZE BEAT VALUE
1/8, 1/4, 1/2, 1*
(DECK)
HOT CUE AUTO LOAD
ON/rekordbox SETTING*/OFF
HOT CUE COLOR
ON/OFF*
–36 dB/–42 dB/–48 dB/–54 dB/–60 dB/–66 dB/–72 d
AUTO CUE LEVEL
B/–78 dB/MEMORY*
SLIP FLASHING
ON*/OFF
ON AIR DISPLAY
ON*/OFF
VINYL SPEED ADJUST
TOUCH&RELEASE*/TOUCH/RELEASE
AUTO PLAY MODE
ON/OFF*
EQUALIZER CURVE
EQUALIZER*/ISOLATOR
CHANNEL FADER
[
CURVE
MASTER ATTENUATOR.
+12 dB, –6 dB, 0 dB*
BOOTH MONIITOR
+12 dB, –6 dB, 0 dB*
ATTENUATOR.
HEADPHONES MONO
MONO SPLIT/STEREO*
SPLIT/STEREO
MIXER MODE
XDJ-RX2/MIDI CONTROL*
LANGUAGE
—
LCD BRIGHTNESS
1, 2, 3*, 4, 5
SCREEN SAVER
ON*/OFF
TOUCH DISPLAY
—
CALIBRATION
AUTO STANDBY
ON*/OFF
VERSION No.
—
*: Setting upon purchase
32
En
USB] terminal (Type B
]CURVE1/[
]CURVE2*/[
]CURVE3
Language settings
Select the language in which the track names and messages are dis-
played on the screen.
! When the language is changed, the messages on the main unit
display are displayed in the selected language.
! To display the information such as track names written in local
character codes other than Unicode, select the language in the
[LANGUAGE] setting.
Correcting the alignment of the
touch display
The alignment of the touch display can be corrected by selecting
[TOUCH DISPLAY CALIBRATION] in the settings in the [UTILITY]
screen.
! If [+] does not move when you touch it, touch it a little longer.
! This unit has been shipped after calibration. Set the calibration if the
unit does not respond to your touch properly.
! When setting the calibration, do not use a pointed object like a ball-
point pen.
Descriptions
Sets whether to disable or enable the loading of new tracks during playback.
For details, see Playing from the position touched on the waveform on page 19 .
Changes the beat size of QUANTIZE. The setting can also be changed in the
[SHORTCUT] screen.
For details, see Calling out hot cues automatically when tracks are loaded on
page 17 .
The lighting color of the [HOT CUE] (A to H) buttons can be changed.
For details, see Lighting colors of performance pads on page 17 .
Sets the auto cue level.
= For details, see Changing the auto cue level on page 22 .
Sets whether or not the indicators of buttons, etc., for which the slip function is
activated when the [SLIP] button is pressed flash.
Sets whether to display/hide the [ON AIR DISPLAY].
= For details, see Adjusting the playback and stopping speeds on page 15 .
= For details, see Auto-play mode on page 31 .
Sets the EQ/ISO (HI, MID, LOW) control function to [EQUALIZER] or [ISOLATOR].
Sets the channel fader curve.
= For details, see Mixer/effect section on page 27 .
Sets the master output attenuator.
Sets the BOOTH output attenuator.
Switches the headphones output between MONO SPLIT and STEREO.
For details, see Monitoring sound with headphones on page 28 .
= For details, see Changing the [MIXER MODE] on page 33 .
Sets the main unit display's language.
Sets the main unit display's brightness.
When set to [ON], the screen saver starts up in any of the following cases:
!
When no track is loaded in this unit for over 5 minutes
!
When no operation is performed for over 100 minutes while in the pause or cue
standby mode or when [END] is displayed on the deck display section.
For details, see Correcting the alignment of the touch display on page 32 .
= For details, see Auto standby function on page 32 .
Displays this unit's software version.