ACME PAGEANT 300ZR User Manual page 9

P/T Feedback
To select P/T Feedback, press the ENTER button to show the PAN/TILT FEEDBACK on the
display. Use the UP/DOWN button to select No (Pan or tilt's position will not feedback while out
of step) or Yes (Feedback while pan/tilt out of step), press the ENTER button to setup. Press the
MENU button back to the last menu or let the unit idle one minute to exit menu mode.
BL.O. P/T Moving
To select BL.O. P/T Moving, press the ENTER button to show the BLACKOUT WHILE PAN/TILT
MOVING on the display, use the UP/DOWN button to select No (normal while pan/tilt moving) or
Yes (blackout while pan/tilt moving), press the ENTER button to setup. Press the MENU button
back to the last menu or let the unit idle one minute to exit menu mode.
White Balance
To select White Balance, press the ENTER button to show the WHITE BALANCE on the display, use
the UP/DOWN button to select Red, Green or Blue. Once selected, press the ENTER button to
confirm, and use the UP/DOWN button to adjust the value from 125 to 255, press the ENTER
button to setup. Press the MENU button back to the last menu or let the unit idle one minute to
exit menu mode.
Cooling Mode
To select Cooling Mode, press the ENTER button to show the COOLING MODE on the display.
Use the UP/DOWN button to select Auto (Normal) or Low (Low speed). Once selected, press the
ENTER button to setup. Press the MENU button back to the last menu or let the unit idle one
minute to exit menu mode.
Dimmer Curve
To select Dimmer Curve, press the ENTER button to show the DIMMER CURVE on the display,
use the UP/DOWN button to select Linear, Square Law, Inverse Squ. or S-curve. Once selected,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
8B