ACME PAGEANT 300ZR User Manual page 10

Linear: The increase in light intensity appears to be linear as DMX value is increased.
Square Law: Light intensity control is finer at low levels and coarser at high levels.
Inverse Square Law: Light intensity control is coarser at low levels and finger at high levels.
S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels.
Dimmer Speed
To select Dimmer Speed, press the ENTER button to show the DIMMER SPEED on the display.
Use the UP/DOWN button to select Fast or Smooth. Once selected, press the ENTER button to
setup. Press the MENU button back to the last menu or let the unit idle one minute to exit menu
mode.
Display Setting
Enter MENU mode, select Display Setting, press the ENTER button to confirm, use the UP/DOWN
button to select Display Inverse, Backlight Auto Off, Backlight Intensity ,Temperature unit,
Display Warning or Language.
Display Inverse
To select Display Inverse, press the ENTER button to show the DISPLAY INVERSE on the
display. Use the UP/DOWN button to select No (normal) or Yes (display inverse). Once selected,
press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle
one minute to exit menu mode.
Backlight Auto Off
To select Backlight Auto Off, press the ENTER button to show the BACKLIGHT AUTO OFF on
the display. Use the UP/DOWN button to select No (display always on) or Yes (display goes off one
minute after exiting menu mode). Once selected, press the ENTER button to confirm and store.
Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode.
9B